GMU-11 Wingtip Bracket

This wingtip bracket is designed and fabricated from 2024-T3 aluminum to meet the material specifications outlined by the Garmin G5 and GMU-11 Magnetometer installation instructions in accordance with the applicable Supplemental Type Certificate. Installation of the bracket must be done in accordance with AC43.13-2b Chapter 1 and 2, and AC43.13-1B Chapter 4. This bracket is not FAA PMAd. Note: Garmin GMU-11 Not Included

Previous slide
Next slide

Legacy XL Stationary Panel Kit

The Legacy XL Stationary Panel Kit is the first STC’d replacement stationary panel on the market for Cessna 172 E through M models (model years 1964 through 1975), and is designed to allow for enough volume to install a either a standard “six pack” T configuration or 10” PFD above the pilot’s control yoke without compromising structural integrity.

MaxPulse MaxDim Switches

Replace your old lighting rheostat switches with new MaxPulse MaxDim switches. Easy to install and a number of applicable uses, we recommend installation of these switches for all our customers. Use MaxDim for panel lighting, Nulites, and interior lights, or the MaxPulse for control of exterior and landing lights. Six Pack Aero is an authorized dealer for MaxPulse MaxDim products.

mooney-controls-web

McFarlane Control Packages

Swap out those original Cessna controls for new, McFarlane controls. We now offer discounted packages for Cessna 172 models on all controls, or just what you need. 

  • Throttle (Standard or Vernier)
  • Mixture
  • Carb Heat
  • Cabin Heat
  • Cabin Air
  • Primer 
  • Push-Pull Control Wrench Kit
error: Content is protected !!

MaxPulse MaxDim Lighting Switches

Let us know what you’re interested in and we’ll get back to you shortly! We offer special pricing with the purchase of Legacy XL Stationary Panel Kits or Panel Fabrication Services. 

McFarlane Engine and Cabin Controls

Let us know what you’re interested in and we’ll get back to you shortly!